75 mm Sand and Cement Fibre Screed | Andrews Construction | Portmarnock Penthouse Apartments

75 mm Sand and Cement Fibre Screed | Andrews Construction | Portmarnock Penthouse Apartments

We pump applied our Traditional Sand/Cement Fibre Floor Screed at 75m to the Penthouses in this stunning new development in Portmarnock, Co. Dublin for Andrews Construction.

Our Traditional Sand/Cement Floor Screed is a pneumatically pumpable, high-quality, leveling floor screed material based on sand and cement. It’s mixed using Portland Cement, sand, fibres, and water and is factory produced on-site by our state-of-the-art mobile screed factory. Our floor screed complies with the requirements of BS EN 13813:2002 and BS 8204: Part 1 and can be used for bonded, unbonded, and floating floor screed constructions for both residential and commercial applications.

Our Traditional Sand/Cement Floor Screed is suitable for floors in homes, offices, public buildings, and places exposed to similar loads. It may be applied as a levelling screed directly onto a load-bearing floor, unbonded on a separating barrier (polythene), or a floating floor. Traditional Sand / Cement Floor Screed should be covered with a floor finish such as tiles, linoleum, parquet, cork, or carpet.

Download

icon-pdf TDS Traditional Sand/Cement Leveling Floor Screed

Benefits of our Traditional Sand/Cement Floor Screed

• Factory produced on site
• Fibre reinforced
• Bonded floor screed construction
• Unbonded floor screed construction
• Suitable for underlayment in wet areas
• BS 8204-1 ISCR Categories A, B and C

For a quote, or to discuss our Rapid ScreedLightweight ScreedTraditional Sand and Cement, or Liquid Screed options, give B Doherty Mobile Screed Factory a call.

Contact B Doherty Mobile Screed Factory:

t: +353 (0)74 9383654

m: +353 (0)86 6031230

e: info@bdohertyscreeding.com

Sopro SLC 578 self levelling screed | Dungloe Community hospital | B Doherty Mobile Screed Factory

Floor Renovation | SLC 578 Self Levelling Compound | Dungloe Community Hospital

We applied Sopro SLC 578 – Self Levelling Compound in this renovation project of a floor in Dungloe Community Hospital. Sopro SLC 578, supplied by Smet Building Products Ltd is a pumpable, self-levelling, rapid-set, cementitious surface filler, for use in conjunction with floor heating internally.

Used for the production of smooth, unbroken surfaces prior to installation of floor coverings, e.g.ceramic tiles, natural stone finishes, textile, elastic and parquet flooring. For coat thicknesses between min. 3 mm and max. 40 mm. (Sopro FS 5 549 floor-levelling compound is recommended for thin-coat (≤ 3 mm) applications; Sopro FE 678 Rapidur® self-levelling screed is recommended for coat thicknesses > 40 mm.) Suitable Substrates include; cement screeds, concrete and untreated concrete surfaces (min. 3 months old), heated floor constructions (cement and calcium sulphate screeds), magnesium oxychloride (magnesite) screeds.

Related Downloads

icon-pdf TDS Sopro SLC 578 – Self Levelling Compound 3-40 mm

NBSplus NBS Specification Clause

Benefits of Sopro SLC 578 – Self Levelling Compound 3-40 mm

• For 3–40 mm coat thicknesses
• Pumpable
• Suitable for floor heating systems
• For indoor use only
• ral stone, glass mosaic and agglomerate tile coverings
• Approx. 1.6 kg/m² per mm coat thickness

B Doherty Mobile Screeding Factory | 160m2 Hemihydrate liquid screed at 50 mm | Donegal

160m2 Hemihydrate Liquid Screed at 50 mm | over UFH | Inishowen, Co Donegal

We pump applied our Self Levelling, Calcium Sulphate based Liquid Floor Screed in this self-build in Inishowen, Co. Donegal.  160m2 was poured over UFH to a depth of 50mm, maximising the transfer of heat.

We instal our liquid screeds using our Mobile Screed Factory. This state-of-the-art machine is a fully automated, mobile, computerised batching system.  Our Mobile Screed Factory machine is mounted on a rigid truck, making it easily manoeuvrable onsite or on-street setup.  The Mobile Screed Factory carries our screed binder, sand & aggregates, and water in separate compartments. The automatic production process ensures materials are precisely weighed, fed to the mixing bin, and into the pump for easy, mess-free installation. This ensures the Mobile Screed Factory produces our liquid floor screed to a consistently high quality.

Our Alpha Hemihydrate Liquid Screed is suitable for floors in homes, offices, public buildings, and places exposed to similar loads.  Screed may be applied as a levelling screed directly onto a load-bearing floor, unbonded on a separating barrier (polythene), or as a floating floor, and is particularly suited in conjunction with underfloor heating or cavity floors.

Benefits of our Alpha Hemihydrate Liquid Screed

    •  CE marked
    •  Perfectly level floors – every time
    •  Reduced screed thickness – maximises insulation
    •  Improved U-Values and increased performance of underfloor heating (UFH)
    •  Full encapsulation of UFH and services pipes
    •  Fully BS 8204-7 compliant installation
    •  EPD certified binder – certificate available for download on EPD Ireland’s Platform
    •  Virtually no shrinkage
    •  Applied at rates of up to 500m² per day
    •  Foot traffic in as little as 6 hours
    •  A laitance-free screed surface
    •  Accurately mixed and poured by our professional team using our Mobile Screed Factory.

For a quote, or to discuss our Rapid ScreedLightweight ScreedTraditional Sand and Cement, or Liquid Screed options, give B Doherty Mobile Screed Factory a call.

Contact B Doherty Mobile Screed Factory:

t: +353 (0)74 9383654

m: +353 (0)86 6031230

e: info@bdohertyscreeding.com

100mm with ppe on Underfloor heating Inishowen Co Donegal | B Doherty Mobile Screed Factory

190m2 at 100mm Sand and Cement Fibre Screed over UFH | Innishowen | Mobile Screed Factory

We pump applied our Traditional Sand/Cement Fibre Floor Screed at 100mm over UFH in this wonderful, interesting new development in Innishowen, Co Donegal for a private self-build client.

Our Traditional Sand/Cement Floor Screed is a pneumatically pumpable, high-quality, leveling floor screed material based on sand and cement. It’s mixed using Portland Cement, sand, fibres, and water and is factory produced on-site by our state-of-the-art mobile screed factory. Our floor screed complies with the requirements of BS EN 13813:2002 and BS 8204: Part 1 and can be used for bonded, unbonded, and floating floor screed constructions for both residential and commercial applications.

Our Traditional Sand/Cement Floor Screed is suitable for floors in homes, offices, public buildings, and places exposed to similar loads. It may be applied as a levelling screed directly onto a load-bearing floor, unbonded on a separating barrier (polythene), or a floating floor. Traditional Sand / Cement Floor Screed should be covered with a floor finish such as tiles, linoleum, parquet, cork, or carpet.

icon-pdf TDS Traditional Sand/Cement Leveling Floor Screed

Benefits of our Traditional Sand/Cement Floor Screed

• Factory produced on site
• Fibre reinforced
• Bonded floor screed construction
• Unbonded floor screed construction
• Suitable for underlayment in wet areas
• BS 8204-1 ISCR Categories A, B and C

For a quote, or to discuss our Rapid ScreedLightweight ScreedTraditional Sand and Cement, or Liquid Screed options, give B Doherty Mobile Screed Factory a call.

Contact B Doherty Mobile Screed Factory:

t: +353 (0)74 9383654

m: +353 (0)86 6031230

e: info@bdohertyscreeding.com

270m2 of 80mm Sand cement screed with ppe fibres Ten Foot Road_B Doherty Screeding

270m2 of 80mm Sand and Cement Fibre Screed | Ten Foot Rd | Co Donegal

We pump applied our Traditional Sand/Cement Fibre Floor Screed in this wonderful new development in Innishowen, Co Donegal for a private self-build client.

Our Traditional Sand/Cement Floor Screed is a pneumatically pumpable, high-quality, leveling floor screed material based on sand and cement. It’s mixed using Portland Cement, sand, fibres, and water and is factory produced on-site by our state-of-the-art mobile screed factory. Our floor screed complies with the requirements of BS EN 13813:2002 and BS 8204: Part 1 and can be used for bonded, unbonded, and floating floor screed constructions for both residential and commercial applications.

Our Traditional Sand/Cement Floor Screed is suitable for floors in homes, offices, public buildings, and places exposed to similar loads. It may be applied as a levelling screed directly onto a load-bearing floor, unbonded on a separating barrier (polythene), or a floating floor. Traditional Sand / Cement Floor Screed should be covered with a floor finish such as tiles, linoleum, parquet, cork, or carpet.

icon-pdf TDS Traditional Sand/Cement Leveling Floor Screed

Benefits of our Traditional Sand/Cement Floor Screed

• Factory produced on site
• Fibre reinforced
• Bonded floor screed construction
• Unbonded floor screed construction
• Suitable for underlayment in wet areas
• BS 8204-1 ISCR Categories A, B and C

 

For a quote, or to discuss our Rapid Screed, Lightweight Screed, Traditional Sand and Cement or Liquid Screed options, give B Doherty Mobile Screed Factory a call.

Contact B Doherty Mobile Screed Factory:

t: +353 (0)74 9383654

m: +353 (0)86 6031230

e: info@bdohertyscreeding.com

 

Mixed on site with our mobile screed Factory_ B Doherty Screeding

Ingredient Solutions Co Cork | DPM with Rapidur EB5 Rapid Drying Screed | No delays

We first added a Liquid DPM to this large refurb job in Bothar Bui Co Cork, followed by our Our Rapidur® EB5 Rapid Drying Sand / Cement Levelling Floor Screed. Mixed on-site with our mobile screed Factory, this will receive a final coat of resin 5 days after laying.  This unique Fast Track Screed is a pneumatically pumpable, high-quality, rapid drying, levelling floor screed material based on sand, cement, and Sopro Rapidur® EB5 screed accelerator.   This screed is unique in that it allows early use of floor and early final floor covering installations. No delays for follow on trades.

Benefits of our Rapidur® EB5 Rapid Drying Sand/Cement Levelling Floor Screed

• Factory Produced On-Site
• Rapid Drying and Fibre Reinforced
• Allowing early use of screed
• Allowing early floor covering installations
• Bonded, Unbonded and Floating Floor Screed Constructions
• Suitable For Underlayment In Wet Areas
• BS 8204-1 ISCR Categories A, B and C

Our Rapidur® EB5 Rapid Drying Sand / Cement Levelling Floor Screed is mixed using Portland Cement, sand, fibres, Sopro Rapidur® EB5 screed accelerator, and water.  It is factory-produced on-site by our state-of-the-art mobile screed factory. Our floor screed complies with the requirements of BS EN 13813:2002 and BS 8204: Part 1 and can be used for bonded, unbonded, and floating floor screed constructions for both residential and commercial applications. The hydration process is speeded up through rapid water-binding properties allowing early floor covering installations.

Related Downloads

icon-pdfB Doherty Screeding Rapidur EB5 Rapid Drying Sand Cement Floor Screed

Redcastle in Donegal | Sand and Cement Screed | B Doherty Mobile Screed Factory

We supplied and fitted our traditional Sand/Cement Fibre Screed in this absolutely glorious location in Redcastle, Donegal.  This screed is expertly delivered using our state-of-the-art, computerised, Mobile Screed Factory.  Sand, cement, and fibres are expertly weighed and dosed for accurate and speedy delivery.

Our Traditional Sand / Cement Floor Screed is a pneumatically pumpable, high-quality, levelling floor screed material based on sand and cement. It’s mixed using Portland Cement, sand, fibres and water and is factory produced on-site by our state-of-the-art mobile screed factory. Our floor screed complies with the requirements of BS EN 13813:2002 and BS 8204: Part 1 and can be used for bonded, unbonded and floating floor screed constructions for both residential and commercial applications. This screed is suitable for floors in homes, offices, public buildings, and places exposed to similar loads.

Related Downloads

icon-pdf TDS Traditional Sand / Cement Leveling Floor Screed

Benefits of Traditional Sand / Cement Floor Screed

• Factory produced on site
• Fibre reinforced
• Bonded floor screed construction
• Unbonded floor screed construction
• Suitable for underlayment in wet areas
• BS 8204-1 ISCR Categories A, B and C

Click the video for a demo of Traditional Sand / Cement Floor Screed

Rapidur® EB5 Rapid Drying Sand & Cement Screed for Murphy Group.

Rapidur® EB5 Rapid Drying Sand / Cement Floor for Murphy Group | Stillorgan Reservoir

We supplied our Rapidur® EB5 Rapid Drying Sand / Cement screed on behalf of the Murphy Group in this project at Stillorgan Reservoir using our Mobile Screed Factory.  This unique Fast Track Screed is a pneumatically pumpable, high-quality, rapid drying, levelling floor screed material based on sand, cement, and Sopro Rapidur® EB5 screed accelerator.   This screed is unique in that it allows early use of floor and early final floor covering installations.

Related Downloads

icon-pdf B Doherty Screeding Rapidur EB5 Rapid Drying Sand Cement Floor Screed

It’s mixed using Portland Cement, sand, fibres, Sopro Rapidur® EB5 screed accelerator and water.  It’s factory-produced on-site by our state-of-the-art mobile screed factory. Our floor screed complies with the requirements of BS EN 13813:2002 and BS 8204: Part 1 and can be used for bonded, unbonded, and floating floor screed constructions for both residential and commercial applications. The hydration process is speeded up through rapid water-binding properties allowing early floor covering installations.

Benefits of our Rapidur® EB5 Rapid Drying Sand/Cement Levelling Floor Screed

• Factory Produced On-Site
• Rapid Drying and Fibre Reinforced
• Allowing early use of screed
• Allowing early floor covering installations
• Bonded, Unbonded and Floating Floor Screed Constructions
• Suitable For Underlayment In Wet Areas
• BS 8204-1 ISCR Categories A, B and C

 

B Doherty Screeding_Mobile Screed Factory_Park West 2,000_m2 Screed

Park West Dublin | 2000m2 Sand & Cement Screed | B Doherty Mobile Screed Factory

We supplied and fitted 2,000m2 of our Sand/Cement Fibre Screed on behalf of lead contractor Harcourt Developments in the new complex in Park West.  This screed is expertly delivered using our state-of-the-art, computerised, Mobile Screed Factory.  Sand, cement, and fibres are expertly weighed and dosed for accurate and speedy delivery.

Our Traditional Sand / Cement Floor Screed is a pneumatically pumpable, high-quality, leveling floor screed material based on sand and cement. It’s mixed using Portland Cement, sand, fibres and water and is factory produced on-site by our state-of-the-art mobile screed factory. Our floor screed complies with the requirements of BS EN 13813:2002 and BS 8204: Part 1 and can be used for bonded, unbonded and floating floor screed constructions for both residential and commercial applications. This screed is suitable for floors in homes, offices, public buildings, and places exposed to similar loads.

Related Downloads

icon-pdf TDS Traditional Sand / Cement Leveling Floor Screed

Benefits of Traditional Sand / Cement Floor Screed

• Factory produced on site
• Fibre reinforced
• Bonded floor screed construction
• Unbonded floor screed construction
• Suitable for underlayment in wet areas
• BS 8204-1 ISCR Categories A, B and C

Click the video for a demo of Traditional Sand / Cement Floor Screed

B Doherty Mobile Screed Factory_Bridgegate Development Arkmount_Ardee

Sand/Cement Fibre Screed | Bridgegate Developments | Ardee Co Louth

We pump applied our Traditional Sand/Cement Fibre Floor Screed in this wonderful new development in Ardee, Co Louth – Bridgegate Developments, for our client Arkmount Construction.

Our Traditional Sand/Cement Floor Screed is a pneumatically pumpable, high-quality, leveling floor screed material based on sand and cement. It’s mixed using Portland Cement, sand, fibres, and water and is factory produced on-site by our state-of-the-art mobile screed factory. Our floor screed complies with the requirements of BS EN 13813:2002 and BS 8204: Part 1 and can be used for bonded, unbonded, and floating floor screed constructions for both residential and commercial applications.

Our Traditional Sand/Cement Floor Screed is suitable for floors in homes, offices, public buildings, and places exposed to similar loads. It may be applied as a levelling screed directly onto a load-bearing floor, unbonded on a separating barrier (polythene) or a floating floor. Traditional Sand / Cement Floor Screed should be covered with a floor finish such as tiles, linoleum, parquet, cork, or carpet.

icon-pdf TDS Traditional Sand/Cement Leveling Floor Screed

Benefits of our Traditional Sand/Cement Floor Screed

• Factory produced on site
• Fibre reinforced
• Bonded floor screed construction
• Unbonded floor screed construction
• Suitable for underlayment in wet areas
• BS 8204-1 ISCR Categories A, B and C